Differences between revisions 15 and 16
Revision 15 as of 2014-07-23 23:11:57
Size: 5060
Comment: Added some troubleshooting links
Revision 16 as of 2014-07-24 08:46:50
Size: 4886
Editor: MalteHelmert
Comment:
Deletions are marked like this. Additions are marked like this.
Line 5: Line 5:
Some configurations of the search component of Fast Downward, such as optimal cost partitioning for landmark heuristics, require an Linear Programming (LP) solver and will complain if the planner has not been built with support for such a solver.

Fast Downward uses the [[http://www.coin-or.org/|COIN-OR]] LP Solver ([[http://www.coin-or.org/Clp/|CLP]]) with the [[https://projects.coin-or.org/Osi|Open Solver Interface]].
Some configurations of the search component of Fast Downward, such as optimal cost partitioning for landmark heuristics, require a linear programming (LP) solver and will complain if the planner has not been built with support for such a solver.
Line 11: Line 9:
To enable LP support in Fast Downward, you need OSI and (optionally but recommended) an external solver such as CPLEX installed on your system (see below). Once OSI is installed, change the line To enable LP support in Fast Downward, you need the [[https://projects.coin-or.org/Osi|Open Solver Interface]] (OSI) and (optionally but recommended) an external solver such as CPLEX installed on your system (see below). Once OSI is installed, go to the directory {{{src/search}}} in the Fast Downward codebase, change the line
Line 22: Line 20:
make clean make distclean
Line 29: Line 27:
IBM has a [[http://www-304.ibm.com/ibm/university/academic/pub/page/ban_ilog_programming|free academic license]] that includes access to CPLEX.
Once you are registered, you can download a binary from the member area of the [[http://www-304.ibm.com/ibm/university/academic/member/page/mem_login|Academic Initiative Website]]. Execute the binary and follow the guided installation. If you want to install in a global location, you have to execute the installer as root.
IBM offers a [[http://www-304.ibm.com/ibm/university/academic/pub/page/ban_ilog_programming|free academic license]] that includes access to CPLEX.
Once you are registered, you can download a binary from the member area of the [[http://www-304.ibm.com/ibm/university/academic/member/page/mem_login|Academic Initiative Website]]. Execute the binary and follow the guided installation. If you want to install in a global location, you have to execute the installer as {{{root}}}.
Line 32: Line 30:
After the installation, set the following environment variables (you may need different paths if you did not install in the default location). After the installation, set the following environment variables (adapt the paths if you did not install in the default location):
Line 34: Line 32:
CPLEX_INCDIR=/opt/ibm/ILOG/CPLEX_Studio1251/cplex/include/ilcplex
CPLEX_LIBDIR=/opt/ibm/ILOG/CPLEX_Studio1251/cplex/lib/x86_sles10_4.1/static_pic
export CPLEX_INCDIR=/opt/ibm/ILOG/CPLEX_Studio1251/cplex/include/ilcplex
export CPLEX_LIBDIR=/opt/ibm/ILOG/CPLEX_Studio1251/cplex/lib/x86_sles10_4.1/static_pic
Line 40: Line 38:
OSI provides a common interface to different LP solvers. To build an interface to a solver, the solver has to be installed before compiling OSI. If you install a solver later, repeat the installation steps of OSI to use it in Fast Downward. These instructions apply to COIN/OSI 0.103.0, which was the last version that was bundled with Fast Downward. Newer versions from http://www.coin-or.org/download/source/Osi/ should work, too. If you experience problems, please [[HomePage#contact|let us know]].
Line 42: Line 40:
For this instruction, we assume that CPLEX and gurobi are installed and the environment variables CPLEX_INCDIR, CPLEX_LIBDIR, GUROBI_INCDIR, and GUROBI_LIBDIR are set up correctly. We only tested CPLEX so far but other sovlers should work analogously. Include options for (only) the solvers you have installed. OSI provides a common interface to different LP solvers. OSI must be compiled '''after''' installing the solver. If you install a solver later, repeat the installation steps of OSI.
We assume in the following that CPLEX and Gurobi are installed and the environment variables {{{CPLEX_INCDIR}}}, {{{CPLEX_LIBDIR}}}, {{{GUROBI_INCDIR}}} and {{{GUROBI_LIBDIR}}} are set up correctly. We only tested CPLEX so far. Only include options for the solvers you have installed.
Line 44: Line 43:
In the following description we assume version 0.103.0 of COIN/OSI since this was the last version that was bundled with Fast Downward.
However, it should also work with the newest version from http://www.coin-or.org/download/source/Osi/

{{{
{{{#!highlight bash
Line 56: Line 52:
                 --prefix="/opt/coin"
                 --with-cplex-incdir=$CPLEX_INCDIR --with-cplex-lib="-lcplex -lm"
                 --prefix="/opt/coin" \
                 --with-cplex-incdir=$CPLEX_INCDIR --with-cplex-lib="-lcplex -lm" \
Line 66: Line 62:
After the installation, set the environment variable {{{COIN_ROOT}}} to the prefix you used in the call to ./configure. After installation, set the environment variable {{{COIN_ROOT}}} to the prefix you used in the call to {{{./configure}}}.
Line 70: Line 66:
The installation above does not seem to work on Mac OS X (See [[http://issues.fast-downward.org/issue295|issue295]]). The problem back then was a bugged configure script in the subdirectory {{{CoinUtils}}}. The [[attachment:coinutils-configure.patched|patched file]] is attached to this page. Download it, make it executable and replace the file {{{Osi-0.103.0/CoinUtils/configure}}} with it. The installation above has been reported to fail on Mac OS X due to a bug in the {{{CoinUtils}}} configure script. (See [[http://issues.fast-downward.org/issue295|issue295]].) If you run into this problem, try downloading the [[attachment:coinutils-configure.patched|patched file]] attached to this page, make it executable, and replace the file {{{Osi-0.103.0/CoinUtils/configure}}} with it:
Line 72: Line 68:
{{{ {{{#! highlight bash
Line 77: Line 73:
It also is necessary to change {{{-m32}}} to {{{-arch i386}}} and {{{--enable-static=yes}}} to {{{--enable-static=no}}} in the above description. Otherwise, the instructions are identical to the Linux instructions above with the following changes:
 * Replace {{{-m32}}} with {{{-arch i386}}}.
 * Replace {{{--enable-static=yes}}} with {{{--enable-static=no}}}.
Line 81: Line 79:
The LP solver has a number of dependencies which might not be installed on your system. If for some reason the LP setup step fails, we'd appreciate if you attempt to troubleshoot it yourself. Check the contents of the {{{setup}}} script in the {{{lp}}} directory to see what it does, try to run the various steps manually, have a look at the errors generated, and consult the Osi documentation. The LP solver has a number of dependencies which might not be installed on your system. If for some reason the LP setup step fails, we would appreciate if you could attempt to troubleshoot it yourself.
Line 86: Line 84:
If after troubleshooting you can get the LP package to work, do let us know of your problem and its solution so that we can improve these instructions. If you still cannot get it to work, we may be able to provide some help, but note that the LP solver is an external package not developed by us. If after troubleshooting you can get the LP package to work, please do let us know of your problem and its solution so that we can improve these instructions. If you still cannot get it to work, we may be able to provide some help, but note that the LP solver is an external package not developed by us.

Back to Doc/Heuristic.

LP solver support

Some configurations of the search component of Fast Downward, such as optimal cost partitioning for landmark heuristics, require a linear programming (LP) solver and will complain if the planner has not been built with support for such a solver.

Instructions for building Fast Downward with LP support

To enable LP support in Fast Downward, you need the Open Solver Interface (OSI) and (optionally but recommended) an external solver such as CPLEX installed on your system (see below). Once OSI is installed, go to the directory src/search in the Fast Downward codebase, change the line

USE_LP=0

in the Makefile to

USE_LP=1

and run

make distclean
make

Installing CPLEX

IBM offers a free academic license that includes access to CPLEX. Once you are registered, you can download a binary from the member area of the Academic Initiative Website. Execute the binary and follow the guided installation. If you want to install in a global location, you have to execute the installer as root.

After the installation, set the following environment variables (adapt the paths if you did not install in the default location):

export CPLEX_INCDIR=/opt/ibm/ILOG/CPLEX_Studio1251/cplex/include/ilcplex
export CPLEX_LIBDIR=/opt/ibm/ILOG/CPLEX_Studio1251/cplex/lib/x86_sles10_4.1/static_pic

Installing the Open Solver Interface on Linux

These instructions apply to COIN/OSI 0.103.0, which was the last version that was bundled with Fast Downward. Newer versions from http://www.coin-or.org/download/source/Osi/ should work, too. If you experience problems, please let us know.

OSI provides a common interface to different LP solvers. OSI must be compiled after installing the solver. If you install a solver later, repeat the installation steps of OSI. We assume in the following that CPLEX and Gurobi are installed and the environment variables CPLEX_INCDIR, CPLEX_LIBDIR, GUROBI_INCDIR and GUROBI_LIBDIR are set up correctly. We only tested CPLEX so far. Only include options for the solvers you have installed.

   1 wget http://www.coin-or.org/download/source/Osi/Osi-0.103.0.tgz
   2 tar xvzf Osi-0.103.0.tgz
   3 cd Osi-0.103.0
   4 
   5 sudo ./configure CC="gcc"  CFLAGS="-m32 -pthread -Wno-long-long" \
   6                  CXX="g++" CXXFLAGS="-m32 -pthread -Wno-long-long" \
   7                  LDFLAGS="-L$CPLEX_LIBDIR -L$GUROBI_LIBDIR" \
   8                  --without-lapack --enable-static=yes \
   9                  --prefix="/opt/coin" \
  10                  --with-cplex-incdir=$CPLEX_INCDIR --with-cplex-lib="-lcplex -lm" \
  11                  --with-gurobi-incdir=$GUROBI_INCDIR --with-gurob-lib="-lgurobi"
  12 sudo make
  13 sudo make install
  14 cd ..
  15 rm -rf Osi-0.103.0
  16 rm Osi-0.103.0.tgz

After installation, set the environment variable COIN_ROOT to the prefix you used in the call to ./configure.

Installing the Open Solver Interface on Mac OS X

The installation above has been reported to fail on Mac OS X due to a bug in the CoinUtils configure script. (See issue295.) If you run into this problem, try downloading the patched file attached to this page, make it executable, and replace the file Osi-0.103.0/CoinUtils/configure with it:

    cp Dowloads/coinutils-configure.patched Osi-0.103.0/CoinUtils/configure
    chmod +x Osi-0.103.0/CoinUtils/configure

Otherwise, the instructions are identical to the Linux instructions above with the following changes:

  • Replace -m32 with -arch i386.

  • Replace --enable-static=yes with --enable-static=no.

If LP setup fails

The LP solver has a number of dependencies which might not be installed on your system. If for some reason the LP setup step fails, we would appreciate if you could attempt to troubleshoot it yourself.

If the configure step fails for COIN/OSI, have a look at their troubleshooting page. If you get warnings about unresolved references with CPLEX, visit their help pages.

If after troubleshooting you can get the LP package to work, please do let us know of your problem and its solution so that we can improve these instructions. If you still cannot get it to work, we may be able to provide some help, but note that the LP solver is an external package not developed by us.